Line Automation & Transfer Modules
Host-dock powered roller conveyor
Line Automation & Transfer Modules · Model SY-AL-PR
Applications
- Powered docking segment for edgebander/edge-coater/drill in-out.
- Interlocks with host I/O to pull/push only on permit.
- Replaces manual board handling and stabilizes cell takt.
- L/R mirror builds fit symmetric layouts.
- Short pitch for single-panel flow; extend for stacks.
- Freeze handshake timing in commissioning to avoid race conditions.
Construction & process
- Fine height adjust matches host deck.
- Low-noise drive preferred on operator side.
- Aviation connectors ease host relocation.
- Optional sleeved rollers protect finishes.
- E-stop joins host safety circuit.
- Length customized to host door depth.
Engineering selection
| Configuration | Effective width (mm) | Section length options (mm) | Deck height (mm) | Panel width capacity (mm) |
|---|---|---|---|---|
| SY-AL-PR-W1000 | 1000 | 2500 / 2800 / 3000 / 3300 | 725±50 / 825±50 / 925±50 | <800 |
| SY-AL-PR-W1300 | 1300 | 2500 / 2800 / 3000 / 3300 | 725±50 / 825±50 / 925±50 | <1000 |
| SY-AL-PR-W1500 | 1500 | 2500 / 2800 / 3000 / 3300 | 725±50 / 825±50 / 925±50 | <1220 |
| SY-AL-PR-W2600 | 2600 | 2500 / 2800 / 3000 / 3300 | 725±50 / 825±50 / 925±50 |
Key ratings
- Rated load
- 60kg/台
- Conveying speed
- 0-25m、35m、52m、80m/min可调
- Motor power
- 0.55kw / 0.75kw / 1.5kw
- Roller OD
- Φ50*1.5mm
- Shaft diameter
- Φ15
- Roller pitch
- 80mm、115mm、200mm