Panel Furniture
Gravity and powered rollers, roller-deck lifts, and host linking (return, centering, traverse) sized to TOR, pitch and takt between process islands.
We deliver the material-flow layer between CNC hosts: layout alignment first (TOR, roller pitch/OD, side-guide clear width, stack mass, I/O map), then interchangeable roller frames, lifts and linking modules.
Project scope is sized from your host interfaces and takt.
Typical segments
- 01
Nesting / cutting out-feed & stack buffer
- 02
Edgebanding & drilling in-feed / out-feed / return
- 03
Assembly staging & elevation change
- 04
Lane change, traverse and packing hand-off
Duty constraints
- Mixed panel lengths / widths on one geometry; shortest piece must still sit on ≥3 rollers under eccentric load
- TOR and pitch must match edgebander / drill in-feed and out-feed without drop steps
- Host permit/busy and safety ownership must be frozen before linking design
What we configure
- Gravity buffers between islands; powered zones where indexed release or host takt is required
- Roller-deck lifts for elevation change while keeping deck continuity
- Auto-line modules: linking rollers, centering, flip, traverse, corner — L/R-hand sets for edgebander return
Solution cases
- Panel furniture line-linkingConvey / Link / Sort · 4–7 pcs/min
- Four-edgebander linkingLink · 0–26 m/min
- L/R edgebander linkingLink · 0–32 m/min
- Edgebander curve-return lineLink · 0–26 m/min
- Traverse sortingSort · 12–16 pcs/min